Avital Tornado 2 Guia de Instalação descarregar pdf (Página 21)

PINK/WHITE (+) PROGRAMMABLE OUTPUT FOR ACCESSORY OR IGNITION

Connect this wire to the second ignition or accessory wire in the vehicle.

(Selectable by using menu 2 feature 6.)

Note:

For vehicles that do not have a second ignition or accessory

wire, this connection is not required.

Remote start harness (H2), 5-pin connector

H2/1

BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT

Connect this wire to the toggle (override) switch as shown in Figure A.

Connect the other wire from the toggle switch to the PARK/NEUTRAL

switch in the vehicle. This wire will test with ground with the gear selector

either in PARK or NEUTRAL. This will prevent the vehicle from accidentally

being started while in a drive gear. This input MUST rest at ground in order

for the remote start system to operate. Connected properly the vehicle will

only start while in PARK or NEUTRAL.

In some vehicles, the PARK/NEUTRAL position switch activates a fac-

tory starter lock-out that will not allow the starter to operate in a drive

gear. In these vehicles, connect this wire to the toggle switch as shown

in Figure B. Connect the other wire from the toggle switch to chassis

ground.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Sem comentários

Avital Tornado 2 Guia de Instalação Página 21